Thursday, October 5, 2017

Project XTracker: Headlight and horn switch

More Project XTracker progress! I got the headlight mounted. I'm using a small LED light bar for the headlight. I fabbed up some small aluminum angle mount brackets and tapped some holes in the bottom triple clamp. The front number plate will get a hole cut in it to fit around the headlight.




Keeping with the minimalist styling of the bike I found a small momentary push button from drag specialties to use for the horn. So I drilled & tapped the of ProTaper motocross bars to mount the button. Then I drilled another hole on the bottom side of the bars closer to the bar mounts to run the wiring out of. I drilled another hole to the top triple clamp for wire routing.